Al 3203 em pó

Overview of Al2O3 Powder

Al2O3 or aluminum oxide is a ceramic material known for its high hardness, excellent dielectric properties, refractoriness, abrasion and corrosion resistance. Alumina powder is the powder form of aluminum oxide used in a variety of applications.

Key properties of Al2O3 powder include:

• Elevada dureza e resistência ao desgaste
• High melting point of over 2000¡«C
• Low electrical and thermal conductivity
• Excelente resistência ao choque térmico
• Resistant to strong acids and alkalis
• Low density around 3.95 g/cm3
• Chemically inert material
• White color powder available in various particle sizes

Chemical Composition of Al2O3 Powder

Al2O3 powder has the following chemical composition:

Compound	Formula	Peso %
Aluminum oxide	Al2O3	99,5% mín
Silicon dioxide	SiO2	Máx. de 0,05%
Iron oxide	Fe2O3	Máx. 0,08%
Titanium dioxide	TiO2	0,03% máx.
Sodium oxide	Na2O	Máx. de 0,05%
Magnesium oxide	MgO	0,03% máx.

 

High purity Al2O3 powder contains over 99.5% aluminum oxide as the principal component. Maximum impurity limits are specified for silica, iron oxide, titania, and other oxides.

Properties of Al2O3 Powder

Al2O3 powder exhibits the following key properties:

Propriedade	Valor
Ponto de Fusão	2050¡«C
Densidade	3.95 g/cm3
Dureza	9 Mohs
Flexural strength	330 MPa
Resistência à Compressão	2600 MPa
Porosidade	<1%
Condutividade térmica	30 W/m.K
Resistividade elétrica	>1014 ohm.cm
Dielectric strength	15-35 kV/mm
Water absorption	0%

The very high melting point, hardness, strength, and dielectric strength make alumina suitable for applications like abrasives, refractories, ceramics, and electrical insulators. It has very low porosity and zero water absorption.

Production Methods for Al2O3 Powder

The common production methods for Al2O3 powder include:

• Bayer Process?- Alumina trihydrate is extracted from bauxite ore and thermally converted to alumina powder. This process yields high purity powder.
• HallÿH¹Èroult Process?- Alumina is dissolved in molten cryolite and electrolyzed to produce aluminum. Alumina powder is recovered as a by-product.
• Calcination?- Dehydration and calcination of various aluminum hydroxides to form alumina powder.
• Sol-gel?- Alumina gel is formed from aluminum alkoxides or nitrates and then dried and calcined to make nanoscale alumina powder.
• Flame Pyrolysis?- Vapor phase combustion of aluminum chloride produces ultrafine alumina powder.

The Bayer process is the most common industrial method while the others yield specialty grade alumina.

Applications of Al2O3 Powder

Key applications of Al2O3 powder include:

• Abrasivos?- For grinding, sanding, polishing, blasting media due to its hardness.
• Refractories?- High temperature furnace linings, ceramics, firebricks for metallurgy, glass, cement industries.
• Cerâmica?- Electrical, structural, biomedical applications using alumina ceramics.
• Catalisadores?- Gamma alumina used as catalyst support and directly as catalyst.
• Revestimentos?- Thermal spray coatings for wear and corrosion protection.
• Polishing?- CMP slurries for polishing silicon wafers, optic components, metals.
• Fillers?- Added to plastics, rubber, paper to improve mechanical properties.
• Cosmetics?- For manufacturing makeup, personal care products.

Specifications of Al2O3 Powder

Al2O3 powder is available under various purity levels, particle size distribution, and grades:

• Pureza?- From industrial (90%) to high purity (99.99%) grades based on impurity levels.
• Tamanho da partícula?- Ranging from nanoscale (10-50 nm) to coarse grade (over 100 microns).
• Phases?- Alpha, gamma, theta, delta phases have different properties.
• Notas?- Conforming to standards for abrasives, technical ceramics, bioceramics, etc.
• Área da Superfície?- For nanosized powder, surface area is 1-100 m2/g.
• Morfologia?- Regular and spherical shaped particles preferred.
• APLICAÇÕES?- Powder customized for composites, 3D printing, other uses.

Global Suppliers of Al2O3 Powder

Some of the major suppliers globally include:

• Almatis (USA)
• Baikowski (France)
• Nippon Light Metal (Japan)
• Sumitomo Chemical (Japan)
• Sasol (South Africa)
• Evonik (Germany)
• Micron Metals (EUA)
• Nanoshel (USA)

These companies produce various grades of Al2O3 powder tailored for applications ranging from abrasives to nanotechnology.

Pricing of Al2O3 Powder

Pricing of Al2O3 powder depends on:

• Purity and grade
• Particle size and surface area
• Purchase quantity
• Características do pó
• Fornecedor e localização

Grau	Intervalo de Preços
Industrial	$5-10 per kg
Technical	$10-50 per kg
Alta pureza	$50-500 per kg
Nanopó	$100-1000 per kg

 

In general, high purity, nanosized, specialized powders command premium pricing compared to industrial commodity grades.

Health and Safety When Handling Al2O3 Powder

Al2O3 powder does not pose severe health and safety risks but standard precautions should be taken:

• Use dust masks or respirators to avoid inhaling fine particles during handling.
• Wear protective goggles and gloves while handling powder.
• Prevent skin contact to avoid drying and irritation.
• Avoid generating and breathing airborne dust. Ensure adequate ventilation.
• Handle and store powder carefully avoiding dispersion in air.
• Properly dispose of waste powder based on environmental regulations.
• Refer to Material Safety Data Sheet (MSDS) provided by the supplier for complete health hazard data.

Inspection and Testing of Al2O3 Powder

Key tests carried out for quality control of Al2O3 powder are:

• Chemical analysis using X-ray Fluorescence (XRF) or Inductively Coupled Plasma (ICP) techniques to ensure composition meets specifications.
• Particle size analysis through laser diffraction or dynamic light scattering method.
• Scanning Electron Microscopy (SEM) to examine particle morphology.
• Specific surface area measurement using gas absorption technique.
• X-ray diffraction (XRD) analysis to determine phases present.
• Impurity analysis for trace metallic elements using ICP mass spectrometry.
• Loss of mass on ignition when heated to 1000¡«C.
• Density measurement through pycnometry method.

Thorough inspection and testing ensures the powder meets the quality and performance requirements of specific applications.

Comparison Between Ï«-Al2O3 and ÎÛ-Al2O3 Powder

Ï«-Al2O3 and ÎÛ-Al2O3 are two common phases of alumina powder compared here:

Parâmetros	Ï«-Al2O3	ÎÛ-Al2O3
Crystal structure	Hexagonal	Cubic
Densidade	3.95 g/cm3	3.65 g/cm3
Dureza	9 Mohs	8 Mohs
Ponto de Fusão	2050¡«C	~1100¡«C
Condutividade térmica	30 W/m.K	5-10 W/m.K
Surface area	<10 m2/g	100-300 m2/g
APLICAÇÕES	Abrasives, ceramics	Catalysts, adsorbents
Preço	Baixo	Maior

 

Ï«-Al2O3 has higher hardness, density, thermal conductivity and refractoriness whereas ÎÛ-Al2O3 has higher surface area and extensively used in catalysts. Ï«-form has wider applications and lower price.

FAQs

Q: What is Al2O3 powder used for?

A: Al2O3 powder is used to manufacture abrasives, refractories, structural ceramics, ceramic coatings, polishing compounds, plastic & rubber fillers, and other applications due to its high hardness, strength, and corrosion resistance.

Q: What is the difference between white, pink, and brown alumina powder?

A: White alumina is high purity Al2O3. Pink and brown alumina contain small amounts of chromium and iron oxides respectively that impart color. White alumina is used when color contamination must be avoided.

Q: Is Al2O3 powder hazardous?

A: Al2O3 powder is generally not classified as a hazardous material but like all fine powders can cause irritation and breathing issues during handling. Use of proper PPE is recommended.

Q: What is the difference between fused and sintered alumina powder?

A: Fused alumina is produced by melting pure alumina whereas sintered type is made by compacting and firing alumina powder. Fused alumina has higher purity and density compared to sintered.

Q: Where can I buy Al2O3 powder for making ceramic components?

A: High purity fine alumina powder for ceramic applications can be purchased from leading suppliers including Almatis, Baikowski, and Micron Metals. Ensure the powder meets specifications for your application.