Best inconel 718 powder for 3D printing

Overview of Inconel 718 Powder

Inconel 718 is a precipitation hardenable nickel-based superalloy powder widely used for additive manufacturing across aerospace, oil & gas, power generation and automotive industries. This article provides a detailed guide to Inconel 718 powder.

Key aspects covered include composition, properties, AM print parameters, applications, specifications, suppliers, handling, inspection methods, comparisons to alternatives, pros and cons, and FAQs. Tables are used to present information in an easy-to-reference format.

Composition of Inconel 718 Powder

The composition of Inconel 718 is:

Element	Gewichts %	Doel
Nikkel	50 – 55	Principal matrix element
Chroom	17 – 21	Oxidatiebestendigheid
IJzer	Balans	Solid solution strengthener
Niobium	4.75 – 5.5	Neerslaghardening
Molybdeen	2.8 – 3.3	Versterking van vaste oplossing
Titanium	0.65 – 1.15	Hardmetalen former
Aluminium	0.2 – 0.8	Neerslaghardening
Koolstof	0,08 max	Hardmetalen former

Trace amounts of cobalt, boron, copper and magnesium are also added to enhance properties.

Properties of Inconel 718 Powder

Key properties of Inconel 718 include:

Onroerend goed	Beschrijving
hoge sterkte	Tensile strength 1050 – 1350 MPa
Phase stability	Retains strength after prolonged use up to 700¡«C
Weerstand tegen corrosie	Resistant to aqueous corrosion and oxidation
Lasbaarheid	Readily weldable with matching filler
Fabricability	Easy to form and machine
Creep resistance	High stress rupture strength at high temperatures

The properties make Inconel 718 suitable for the most demanding applications.

AM Print Parameters for Inconel 718 Powder

Typical parameters for printing Inconel 718 powder include:

Parameter	Typische waarde	Doel
Laaghoogte	20 – 50 Ã×m	Balance speed and resolution
Laservermogen	195 – 350 W	Voldoende smelten zonder verdamping
Scansnelheid	700 – 1300 mm/s	Density versus build rate
Afstand tussen luiken	80 – 160 Ã×m	Mechanische eigenschappen
Ondersteunende structuur	Minimaal	Gemakkelijk verwijderen
Heet isostatisch persen	1120¡«C, 100 MPa, 3h	Eliminate internal voids

The parameters depend on factors like build geometry, temperature management and post-processing needs.

Applications of 3D Printed Inconel 718 Parts

Inconel 718 parts made by AM are used in:

Industrie	Componenten
Lucht- en ruimtevaart	Turbine blades, disks, hot section parts
Oil & gas	Downhole tools, valves, pumps
Stroomopwekking	Combustion cans, transition ducts
Automobielen	Turbocharger wheels, exhaust valves
Medisch	Orthopedic implants, surgical tools

Benefits over wrought parts include complex geometries and reduced buy-to-fly ratios.

Specifications of Inconel 718 Powder for AM

Inconel 718 powder must meet the following specifications for 3D printing:

Parameter	Specificatie
Maatbereik van de deeltjes	10 – 45 Ã×m
Vorm van deeltjes	Bolvormige morfologie
Schijnbare dichtheid	> 4 g/cc
Tapdichtheid	> 6 g/cc
Halflow	> 23 sec voor 50 g
Zuiverheid	>99,9%
Zuurstofgehalte	<100 ppm

Custom size distributions and controlled composition available.

Suppliers of Inconel 718 Powder

Prominent Inconel 718 powder suppliers include:

Provider	Locatie
Praxair	Verenigde Staten
Carpenter Powder Products	Verenigde Staten
Sandvik Osprey	VK
LPW-technologie	VK
Erasteel	Frankrijk
AP&C	Canada

Prices range from $50/kg to $150/kg, influenced by quality and order quantity.

Handling and Storage of Inconel 718 Powder

As a reactive material, Inconel 718 powder requires controlled handling:

• Store sealed containers in a cool, dry inert atmosphere
• Prevent exposure to moisture, air, temperature extremes
• Use properly grounded equipment during transfer
• Avoid dust accumulation and ignition sources
• Plaatselijke afzuiging aanbevolen
• Follow applicable safety guidelines

Correct storage/handling prevents composition changes or hazards.

Inspection and Testing of Inconel 718 Powder

Inconel 718 powder batches are validated using:

Methode	Geteste parameters
Zeefanalyse	Particle size distribution
SEM-beeldvorming	Deeltjesmorfologie
EDX	Chemie en samenstelling
XRD	Aanwezige fasen
Pyknometrie	Dichtheid
Halflow	Poeder vloei-eigenschappen

Testing per ASTM standards ensures batch-to-batch quality consistency.

Comparing Inconel 718 to Alternative Superalloy Powders

Inconel 718 compares with other alloys as:

Legering	Kosten	Printbaarheid	Lasbaarheid	Kracht
Inconel 718	Laag	Goed	Uitmuntend	Medium
Inconel 625	Medium	Uitmuntend	Uitmuntend	Laag
Inconel 939	Heel hoog	Redelijk	Beperkt	Uitmuntend
Haynes 282	Hoog	Goed	Beperkt	Uitmuntend

For balanced properties at lower cost, Inconel 718 supersedes other Ni superalloys for many applications.

Pros and Cons of Inconel 718 Powder for AM

Voordelen	Nadelen
Proven material credentials in AM	Lower high temperature strength than some alloys
Excellent weldability and machinability	Susceptible to solidification cracking during printing
Readily printed into complex shapes	Requires controlled atmosphere handling
Cost advantage over exotic superalloys	Significant post-processing often required
Available from range of suppliers	Relatively low hardness after printing

Inconel 718 enables high performance AM at a reasonable cost.

Frequently Asked Questions about Inconel 718 Powder

Q: What particle size range works best for printing Inconel 718 alloy?

A: A range of 15-45 microns provides the optimum combination of flowability, high resolution, and high density parts.

Q: What post processing is typically required for Inconel 718 AM parts?

A: Hot isostatic pressing, heat treatment, and machining are commonly needed to eliminate voids, optimize properties, and achieve tolerances.

Q: Is Inconel 718 easier to 3D print than other Ni superalloys?

A: Yes, its excellent weldability and lower cracking susceptibility make Inconel 718 one of the easier Ni-based superalloys to process by AM.

Q: What industries use Inconel 718 alloy for metal 3D printing?

A: Aerospace, oil & gas, power generation, automotive, and medical sectors are major applications benefiting from additively manufactured Inconel 718.

Q: Does Inconel 718 require supports when 3D printing?

A: Minimal supports are recommended on overhangs and bridged sections to prevent deformation and allow easy removal after printing.

Q: What defects can occur when printing Inconel 718 powder?

A: Potential defects are cracking, porosity, distortion, incomplete fusion, and surface roughness. Most can be prevented with optimized parameters.

Q: What hardness can be expected with Inconel 718 AM components?

A: Hardness after printing is typically 30-35 HRC. Post-processes like aging can increase it to 40-50 HRC for higher wear resistance.

Q: What accuracy can be obtained with Inconel 718 printed parts?

A: Comparable dimensional tolerances and surface finishes to CNC machined components can be achieved after post-processing.

Q: Is hot isostatic pressing mandatory for Inconel 718 3D printed parts?

A: HIP eliminates internal voids and improves fatigue life. It may not be required for non-critical applications.

Q: What alloy powder has properties closest to Inconel 718 for AM?

A: Inconel 625 has comparable corrosion resistance and weldability to 718 but lower strength. Inconel 939 trades weldability for higher strength.